China DIN766 Short Link DIN766 DIN763 Custom SS304 SS316 Chain Stainless Steel Chain double chain

Product Description

Solution Description

Most of the marble pendants are produced of stainless steel, due to the fact stainless steel itself is not simple to rust, anti-corrosion, anti-ageing and other characteristics, and the qualitative result is good, so that a lot of buyers like it extremely considerably. To a great deal of extent, when producers use stainless steel in production, they select components according to customers’ preferences.

DIN766 Hyperlink Chain:

Size Inside Size Inside Width Outside Width Length For each eleven Backlinks Fat Per M
MM ±MM MM +MM -MM MM MM MM +MM -MM KG
two .two 12 .2 .2 3.five seven.5 132 1. .five .07
three .two sixteen .2 .two 4.two eleven 176 1.four .seven .16
four .2 sixteen .3 .2 five 13.7 176 two.1 one.1 .32
five .two 18.5 .four .2 6 seventeen 203.5 two.four one.two .five
six .2 18.5 .4 .two 7.2 twenty.2 203.5 two.four 1.2 .8
seven .3 22 .four .2 eight.4 23.8 242 three. one.four 1.one
eight .3 24 .four .2 9.six 27.two 264 3.2 1.5 one.4
9 .four 27 .five .three ten.8 30.6 297 3.six one.8 one.8
10 .four 28 .five .three twelve 34 308 three.seven one.9 two.2
eleven .4 31 .five .three thirteen.two 37.four 341 four. two. two.seven
12 .three 36 .6 .3 fourteen.4 forty.eight 396 4.four two.two 3.10
13 .5 36 .6 .three 15.6 forty four.2 396 4.six two.four 3.8
fourteen .6 41 .seven .4 16.8 forty seven.6 451 five.4 2.seven four.4
sixteen .6 forty five .eight .4 19.two fifty four.4 495 6. three. 5.seven
eighteen .9 fifty .eight .four 21.six 61.two 550 six.6 three.3 seven.3
19 .4 fifty three .nine .4 22.eight sixty four.six 583 seven. 3.seven 7.ninety seven
20 one. 56 1. .5 24. sixty eight. 616 seven.four 3.7 9.
22 1.2 62 1.1 .five 26.four seventy five. 682 8. four. eleven.
23 one.2 sixty four 1.one .5 27.6 78.2 704 8.4 4.two 12
26 one.3 73 one.2 .6 31.2 88.4 803 nine.six four.eight 15

 

In depth Photographs

Smooth Area
                                                                

sleek surface area,no barr

technological innovation manufacturing

excellent corrosion resistance

warmth resistance, low temperature toughness and

 mechanical properties

Full THREAD
                                                             
 

Smooth floor, deep thread mouth,

uniform power is not effortless to slip

 

Company Profile

Company Overview

HangZhou RISCO STAINLESS Metal Items CoLTD is located in the renowned stainless metal city–Dainan town, we have a lot more than 10 many years of manufacturing experience, with superior tools, senior expert and technical personnel, and innovative management program. Manufacturing facility specializing in the production of stainless steel fasteners, the major creation bolts, nuts, threaded rod, anchor bolt, screw, marble anchor, as properly as non-common elements, generation a hundred and fifty-three hundred tons for each month, the firm has established up HangZhou FASTENER IMPORT EXPORT COLTD. Our merchandise are mainly marketed to the Middle East, Southeast Asia,The usa, Africa. The good quality of the merchandise have been praised by consumers, we are looking ahead to cooperate with numerous at residence and overseas to develop a wonderful future.

Organization Info:
Enterprise Type: Manufacturer, Trade Firm
Solution Range: Fasteners, Hardware
Goods/Service: Hex Bolt,Threaded Rod,Hex Nut,Anchor,Stud Bolt,Screws
Cash (Milin US S):100000RMB Calendar year
Certificate: ISO9001,ACS

Trade Capacity:
Trade InformationIncoterm : FOB,CFR,CIF,EXW,FCA,CPT,CIP,Other individuals
Terms of Payment : L/C T/T
Peak time lead time :1-3 months
Off season lead time :1-3 months
Once-a-year Revenue Quantity (Million US $) : US$50
Million- US$a hundred Million
Yearly Obtain Volume (Milion US S)USs2.5 Million-US$5 Millon

FAQ

US $0.1-50
/ Piece
|
1,000 Pieces

(Min. Order)

###

Standard: DIN, ANSI, GB, JIS
Material: 304 316
Connection: Anchor
Surface Treatment: Polishing
Head Type: Anchor
Transport Package: Cartons and Pallets

###

Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Size Inside Length Inside Width Outside Width Length Per 11 Links Weight Per M
MM ±MM MM +MM -MM MM MM MM +MM -MM KG
2 0.2 12 0.2 0.2 3.5 7.5 132 1.0 0.5 0.07
3 0.2 16 0.2 0.2 4.2 11 176 1.4 0.7 0.16
4 0.2 16 0.3 0.2 5 13.7 176 2.1 1.1 0.32
5 0.2 18.5 0.4 0.2 6 17 203.5 2.4 1.2 0.5
6 0.2 18.5 0.4 0.2 7.2 20.2 203.5 2.4 1.2 0.8
7 0.3 22 0.4 0.2 8.4 23.8 242 3.0 1.4 1.1
8 0.3 24 0.4 0.2 9.6 27.2 264 3.2 1.5 1.4
9 0.4 27 0.5 0.3 10.8 30.6 297 3.6 1.8 1.8
10 0.4 28 0.5 0.3 12 34 308 3.7 1.9 2.2
11 0.4 31 0.5 0.3 13.2 37.4 341 4.0 2.0 2.7
12 0.3 36 0.6 0.3 14.4 40.8 396 4.4 2.2 3.10
13 0.5 36 0.6 0.3 15.6 44.2 396 4.6 2.4 3.8
14 0.6 41 0.7 0.4 16.8 47.6 451 5.4 2.7 4.4
16 0.6 45 0.8 0.4 19.2 54.4 495 6.0 3.0 5.7
18 0.9 50 0.8 0.4 21.6 61.2 550 6.6 3.3 7.3
19 0.4 53 0.9 0.4 22.8 64.6 583 7.0 3.7 7.97
20 1.0 56 1.0 0.5 24.0 68.0 616 7.4 3.7 9.0
22 1.2 62 1.1 0.5 26.4 75.0 682 8.0 4.0 11.0
23 1.2 64 1.1 0.5 27.6 78.2 704 8.4 4.2 12
26 1.3 73 1.2 0.6 31.2 88.4 803 9.6 4.8 15
US $0.1-50
/ Piece
|
1,000 Pieces

(Min. Order)

###

Standard: DIN, ANSI, GB, JIS
Material: 304 316
Connection: Anchor
Surface Treatment: Polishing
Head Type: Anchor
Transport Package: Cartons and Pallets

###

Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Size Inside Length Inside Width Outside Width Length Per 11 Links Weight Per M
MM ±MM MM +MM -MM MM MM MM +MM -MM KG
2 0.2 12 0.2 0.2 3.5 7.5 132 1.0 0.5 0.07
3 0.2 16 0.2 0.2 4.2 11 176 1.4 0.7 0.16
4 0.2 16 0.3 0.2 5 13.7 176 2.1 1.1 0.32
5 0.2 18.5 0.4 0.2 6 17 203.5 2.4 1.2 0.5
6 0.2 18.5 0.4 0.2 7.2 20.2 203.5 2.4 1.2 0.8
7 0.3 22 0.4 0.2 8.4 23.8 242 3.0 1.4 1.1
8 0.3 24 0.4 0.2 9.6 27.2 264 3.2 1.5 1.4
9 0.4 27 0.5 0.3 10.8 30.6 297 3.6 1.8 1.8
10 0.4 28 0.5 0.3 12 34 308 3.7 1.9 2.2
11 0.4 31 0.5 0.3 13.2 37.4 341 4.0 2.0 2.7
12 0.3 36 0.6 0.3 14.4 40.8 396 4.4 2.2 3.10
13 0.5 36 0.6 0.3 15.6 44.2 396 4.6 2.4 3.8
14 0.6 41 0.7 0.4 16.8 47.6 451 5.4 2.7 4.4
16 0.6 45 0.8 0.4 19.2 54.4 495 6.0 3.0 5.7
18 0.9 50 0.8 0.4 21.6 61.2 550 6.6 3.3 7.3
19 0.4 53 0.9 0.4 22.8 64.6 583 7.0 3.7 7.97
20 1.0 56 1.0 0.5 24.0 68.0 616 7.4 3.7 9.0
22 1.2 62 1.1 0.5 26.4 75.0 682 8.0 4.0 11.0
23 1.2 64 1.1 0.5 27.6 78.2 704 8.4 4.2 12
26 1.3 73 1.2 0.6 31.2 88.4 803 9.6 4.8 15

Different types of drive chains

There are many different types of drive chains. You should be able to differentiate between roller chains, forged rivetless chains, double chains, flat-top chains, and helical chains by the terms used. This article will provide information on the different types of chains. Then, you can choose the right one according to your needs. If you haven’t purchased a chain yet, read this article to get started. It will also provide information on the pros and cons of each type.
chain

roller chain

There are several differences between drive chains and roller chains, but in essence, the two are functionally similar. The choice of which type to use depends largely on the type of environment it will be exposed to. While roller chains are suitable for clean indoor environments, they are not very forgiving when it comes to rubbing against the rails. Following are the main differences between a drive chain and a roller chain. Using the correct drive chain is essential for a smooth and efficient running machine.
Roller chain drive chains come in many different weights and tensile strengths. For light-duty applications, use a smaller pitch chain. For heavy-duty applications, use larger pitch chains. The design simplicity of these chains makes them ideal for a variety of applications. While they are great for a variety of applications, the durability of these chains makes them ideal for a variety of applications. Some of the main uses of roller chain drive chains are listed below.
When replacing the drive chain, be sure to follow the safety guidelines. The most important thing to remember is not to place the chain on a dirty floor as it may cause stretch or damage. After removing the chain from the sprocket, apply the measured load specified by ANSI to it. If the load exceeds this value, the chain may bend. A suitable load for measuring a drive chain should be at least six links.
While roller chains are usually made of carbon steel, some are made of stainless steel and are used in food processing machinery. In these environments, the chain may be made of stainless steel for lubrication. Brass and nylon are also sometimes used to meet these requirements. Regardless of the application, however, choosing the right drive chain is critical to the success of a roller chain machine. It is important to maintain the proper balance between the roller chain and the machine.
To properly use a roller chain, first determine the size of the sprocket used for the drive. The size of the chain should be smaller than the smallest sprocket to prevent tooth interference and provide adequate winding on the smaller sprocket. A good practice is to choose a drive chain with a center distance of 30 to 50 times the chain pitch. The longest possible center-to-center distance is approximately 80 times the chain pitch but is not recommended for high-speed applications.

Drop forged rivetless chain

Drop-forged rivetless drive chains are made of drop-forged steel components. Their proportions are suitable for strength and lightweight. Forged rivetless chains are generally divided into three types. Each of these types has its own set of important specifications. Key topics include minimum ultimate tensile strength, chain length tolerances, and link dimensions. Read on to learn more about each type and its uses.
One of the main features of forged rivetless chains is that, despite their relatively low price, they are designed to be very durable. The quality of a forged chain depends on the structure and design of the chain. The manufacturer of this type of drive chain is CZPT, which has a large stock of these chains. The chain is proof tested after assembly and comes with a two-year parts replacement warranty.
Forged rivetless chains are available in a variety of pitch sizes and strength grades. They are made of cast manganese or alloy steel and have an average strength of 24,000 to 300,000 pounds. These chains are suitable for automotive, conveyor, and material handling as well as meat packaging, sugar processing, and steel mill applications. They are also widely used in conveying systems. To ensure quality and performance, manufacturers offer a variety of forged chains.
CZPT offers forged CZPT drive chains for fatigue-free operation. The chain includes a solid one-piece forged drive pawl for optimum durability. Chains are available in Figure 8 and in D-shape styles. For more information, please contact CZPT directly. Custom Drop-Forged rivetless drive chains can be ordered. Manufacturers also offer custom chains for specific application needs.

double chain

Duplex drive chains have two sets of rollers instead of one, producing twice the power. Double chain roller chains have pins and roller bearings, while triple chain chains have an extra row of plates to accommodate the three sprockets. They are usually interchangeable with each other. They are available for US, UK, and ISO standards. They are made of carbon steel, stainless steel, and nickel or nickel-plated.
chain

flat top chain

Flat-top drive chains are ideal for curved or straight tracks and come in many different types and thicknesses. These chains are highly resistant to wear and are usually made of steel, stainless steel, or plastic. CZPT manufactures special brands of flat-top chains with high wear resistance and excellent noise reduction. In addition to being versatile, flat-top chains can be used in a variety of industrial applications.
There are two main types of CZPT chains: solid top or raised rib. One piece is formed from a single unit link and the other has roller base links for added strength. The two-piece chain combines flat tabletop links and a roller bottom chain for added strength. These chains are available in widths up to 20 feet and are available in a variety of widths. These chains are available in stainless steel, cast iron, or plastic.
The hinge pin is another important part of the flat top chain system. Support chain plate to ensure smooth conveying. The hinges are available in single hinge pin and double hinge pin styles. Standard hinge pins are designed for straight, narrow-width chainplates; double hinge pins are designed for longer, heavier products. The hinge pins also come in many different materials, including aluminum and galvanized steel. This allows for customization based on machine design, operating conditions, and drive method.
Whether your flat-top chain conveyor system is large or small, a high-quality flat-top chain will get the job done. With their low maintenance and low maintenance design, these chains are easy to clean and maintain. They can accommodate workpiece pallets of various sizes, and their flexibility makes them ideal for many different applications. They can also be highly customized for various industries. So if you need an industry-specific conveyor, then a flat-top drive chain is the way to go.

China DIN766 Short Link DIN766 DIN763 Custom SS304 SS316 Chain Stainless Steel Chain     double chainChina DIN766 Short Link DIN766 DIN763 Custom SS304 SS316 Chain Stainless Steel Chain     double chain
editor by czh 2023-01-15